Roof Accessories
Ridge caps, valley trays, flashings and flat sheet — every part that closes a joint on a stone coated steel roof, made to match our profiles and colours. Non-standard sizes and bespoke shapes can be made to your drawings — we confirm the drawing and send a sample first.
Angle Ridge Cap I
Sharp-angled ridge cap for standard gable and hip ridges. 2000 mm per piece, 70 × 70 mm faces.
Angle Ridge Cap II
The wider 130 mm version — covers deeper ridges and evens out an uneven tile line.
Angle Ridge Cap
Compact 80 mm cap for low ridges and short roof runs.
Square Ridge Cap
Flat-topped cap that reads as a clean square line along the ridge.
Circular Ridge Cap
Rounded cap for barrel-style profiles and curved hips. 380 mm arc, 85 mm drop.
Valley Tray
Open valley tray that carries water between two roof planes. 2000 mm per piece.
Wall Side Flashing
Steps the roof up against a wall, chimney or parapet in 10 mm increments.
Barge Board Cover
Caps the barge board along the gable edge so the timber never shows.
Eaves Flashing
Closes the eaves line and keeps water off the fascia. 180 mm face.
Flat Sheet
Plain coated steel sheet, 2000 × 450 mm, for site-formed flashings and repairs.
Roofing Nail
Hot-dip galvanised ring-shank nail for stone-coated tiles.
Coil Nail
Coil collation for pneumatic nailing guns.
Nail with Washer
Nail with sealing washer for exposed fixings.