Water Collector
Gutters, elbows, outlets, downspouts and fixings — the parts that take water off the roof and away from the wall. All sized to our profiles, shipped with the tiles.
Rain gutter systems, downspouts and fixed nails — the parts that decide whether a finished roof sheds water properly. All of it is made to match our profiles and shipped with the tiles.
90° Elbow
Changes the downspout run by 90° without kinking the pipe.
65° Elbow
A softer 65° bend for tight eaves and wall offsets.
90° Outside Corner
Wraps the gutter around an external wall corner.
90° Inside Corner
Closes the gutter run on an internal corner.
Gutter Drop Outlet
Connects the gutter floor to the downspout.
Gutter End Cap
Seals the open end of a gutter run.
Round End Cap
End cap for round-profile gutters.
Diverter 65° / 90°
Splits or re-directs flow at a junction.
Equal Tee 50
Branches a 50 mm run into two equal outlets.
Downspout
Round downspout in 2 m lengths, cut to site.
Conversion Joint 75
Steps between 75 mm and smaller gutter sizes.
Conversion Joint 110
Steps between 110 mm and smaller gutter sizes.