Our factory
Start with the process.Every tile to a standard.
Everything we sell is made on our own lines — sheeting, acrylic coating, natural stone granule and final cure, from coil to packed pallet.
- 2014
- Founded
- 8,000,000 m²
- Annual capacity
- 6 lines
- Automatic production
- 50 years
- Warranty
How a tile is made
Four steps, all under our own roof.
- 01
Steel coil in. Aluminium-zinc coated steel is uncoiled, tension-levelled and cut to the width of the profile.
- 02
Roll-formed. Each profile is pressed on its own die set, so the step, barrel or shingle shape stays identical tile after tile.
- 03
Stone coated. Base coat, natural stone granule, then a clear acrylic overglaze — the layer that carries the colour and blocks UV.
- 04
Cured and checked. Panels run through a curing oven, then every batch is inspected for coating weight, adhesion and colour before packing.
Quality control
Four checks, every batch.
Not a certificate on the wall — four points on the line where a batch can actually be stopped.
- 01Coil in
Thickness, coating weight and surface are checked before the coil goes on the decoiler. Wrong coil, no run.
- 02In line
Thickness is measured continuously while forming. A sheet out of tolerance is rejected at the line, not sorted out later.
- 03Coat and bend
Every colour batch gets a cross-hatch adhesion test and a bend test. Granule coverage is checked by eye and by weight.
- 04Before loading
Each container leaves with a QC sheet signed by the line supervisor — batch number, colour, quantity, test results.
Before you order
Visit the plant.
Distributors are welcome at the plant any working day. If a flight is not practical, we run a 30-minute video walkthrough on WhatsApp or Zoom: coil store, press line, stone coating, QC bench and loading bay, in the order it happens.